RAID Data Recovery

Seagate Recovery Services’ RAID Data Recovery and in-lab critical response services provide state-of-the-art data recovery services for all Redundant Array of Independent Drive (RAID) configurations, for all brands, media formats and/or operating systems.

About RAID Data Recovery

The majority of small to medium sized businesses across the globe have turned to RAID configured systems for their storage solutions. The most frequently cited reasons for using RAID arrays in businesses today are the highly fault-tolerant level offered and the cost effectiveness of acquisition and maintenance.

However, if a RAID array fails as a result of component malfunction (including hard drives and controller cards) or operating and application corruption, it leaves the data unusable and in most cases corrupted.


Loading
RAID data recovery is an intricate task since RAID data configurations often have different data layouts depending on manufacturers – often for competitive reasons. Without an in-depth knowledge of how RAID arrays are configured at hardware, firmware and software levels, data recovery attempts will not only fail, but result in further data corruption.

Using its vast knowledge of RAID array storage technology, Seagate Recovery Services can successfully recover data from the very earliest to most recent NAS, SAN and Server RAID configurations on the market.




RAID servers and configurations supported include:

RAID servers and configurations supported
RAID servers and configurations supported

Why RAID Arrays Fail

There are four general categories regarding failure: hardware RAID failure, human error, software RAID failure and application failure.

Hardware RAID failure, human error, software RAID failure and application failure
Hardware RAID failure, human error, software RAID failure and application failure

See more at: http://www.seagate.com/gb/en/tech-insights/raid-data-recovery-master-ti/ 


This article is about the latest developments of technology 3D printers;

Bagpipe-Playing Robot Has Been Created Using 3D Printed E-Nable Hands

XenonJohn, a user of Instructables, has created an inspiring bagpipe-playing robot using 3D printed parts. The system comprises a pair of 3D printed e-NABLE hands, an Arduino Mega 2560 and a low-priced bagpipe “chanter.”

The e-NABLE Community has been founded by Ivan and Jen Owen in 2011. Currently, volunteers from all over the world are open-handedly using their 3D printers to make prosthetic hands for the needy children. Eventually, the e-NABLE prosthesis became one of the most recognized communities for artificial hands in the world.

XenonJohn took two e-NABLE prosthetic hands and wired them to an Arduino. Finally, he automated them to play the bagpipes. The name of the bagpipe-playing robot is Ardu McDuino. Presently, the 3D printed robot comprises two e-NABLE hands, an Arduino, a bagpipe chanter, and several electronic components. The system is actually low-priced and it is a bit like a recorder that doesn’t create too much sound. Johan amazingly made this device; a robot that plays the chanter just like a human player would play, however, the robot does it with the help of its 3D printed fingers.


Loading
Usually, e-NABLE prosthetic hands lack dexterity that is needed to play any musical instrument. Hence, John equipped the 3D printed hands with solenoids – wires that work like magnets. With the help of these solenoids, the “brain” of the robot can command each finger to press down on its equivalent chanter hole. This feature helps the robot to play an entire song.

While creating this 3D printed robot, John had to face some challenges such as he had to be extremely careful about the size of the prosthetic hands for his selected chanter. Finally, he recognized that the 3D printing of prosthetic hands produced at a scale of 1.71 is the ideal size digits for the device.  On the other hand, John incorporated a system for “grace notes” into his code. It was necessary for him to add additional notes so that the air flow through the chanter will be persistent.



At this moment, the robot is able to play the music in all style. However, John has yet not created an ideal air pump for the device. For this reason, users now need to blow air into the tube. With the help of John’s Instructables guide, users can also try to make their own 3D printer robot.

See more at: https://www.3dprintersonlinestore.com/robot-has-been-created-using-3d-printed-e-nable-hands



3D Printing Service

3dprinters.3dsystems.com has lot of downloadable content. It offers free software, apks, videos, pdf, games, applications which can be downloaded for Iphone, android, mobile, tablet, Mac, PC all these downloads are for free. Its a reputed website and all downloadable content has been scanned by antivirus softwares.

Download of any software or game from 3dprinters.3dsystems.com will be easy. If you face any problem related to download of any toolbar or software you can contact this site directly and they will solve your problem.


Loading
The website 3dprinters.3dsystems.com has a global rank of 50122 and has 2539.08510009 daily visitors. On social platform it has 0 facebook likes and 0 tweets with a google page rank of 0 it has maximum traffic from United States . The hosting server of this website is located in XX Unknown city in Unknown region. As per our calculations this Domain Name has a worth of $15894.16.



This site has average amount of unique visitors 2539.08510009 per day. This makes this site earn a average revenue of 30.468 per day. If you want to download the content, buy something or thinking to make an online transaction through this site. We would recommend that do it with caution as the site has yet not become a widely visited site and there may be very less info about this site online. This website has good search engine traffic and fine reputation with good content or maybe a bit average quality content. This website is still working on to improve it's social network image. It is having average number of followers and it has to go a long way to become socially sound.

See more at: http://3dprinters.3dsystems.com/printer-buyers-guide/




Following this there are great deals about online college that is The Open University:

The Open UniversityThe Open University

With The Open University 'supported open learning' programme now you can complete a postgraduate/masters degree qualification from a globally respected UK university without having to put your career on hold.

The Open University has students in over 128 countries across the world studying for degree qualifications with over 70% continuing to work at the same time.

Postgraduate degree programmes

Since its creation in 1969 The Open University has awarded more than 90,000 postgraduate qualifications including more than 43,000 master degrees.

We have over 50 qualifications including postgraduate certificates, diplomas and taught masters degrees, across a wide range of subjects including Arts and Humanities, Business and Management, Computing and IT, Education, Engineering, Law, Mathematics and Science.


Loading
In addition to our postgraduate/masters programmes we also offer a limited number of undergraduate honours degrees in Science and Psychology.



View courses available in your country @ http://www.openuniversity.edu/courses-intermediate




Rapid Prototyping Definition

Rapid prototyping is the speedy creation of a full-scale model. The word prototype comes from the Latin words proto (original) and typus (model).

In manufacturing, rapid prototyping is used to create a three-dimensional model of a part or product. In addition to providing 3-D visualization for digitally rendered items, rapid prototyping can be used to test the efficiency of a part or product design before it is manufactured in larger quantities. Testing may have more to do with the shape or size of a design, rather than its strength or durability, because the prototype may not be made of the same material as the final product. Today, prototypes are often created with additive layer manufacturing technology, also known as 3-D printing. Direct metal laser sintering (DMLS) may also be used to create aluminum, stainless steel or titanium prototypes. This process uses laser beams to melt and fuse metal powders into solid parts.


Loading
In network design, rapid prototyping can be used to map the architecture for a new network.  A rapid prototype tool called Mininet, for example, allows the user to quickly create, interact with, customize and share a software-defined network (SDN) prototype on a single computer which simulates a network topology that uses Openflow switches.



In software development, when a small team quickly builds a working software program for users to review, it is also called rapid prototyping. It may also be called rapid application development (RAD).

http://searchmanufacturingerp.techtarget.com/definition/Rapid-prototyping




Virtual Servers
Real Performers

The cloud is not a commodity, and virtual servers aren’t the same wherever you go. You expect any virtual cloud server to have speed of deployment, flexible scalability, and pay-as-you-go billing. SoftLayer virtual servers exceed those expectations. Our virtual servers deliver a higher degree of customization, transparency, predictability, and automation, and they integrate seamlessly with SoftLayer bare metal servers.

Build the Virtual Server You Need

Use the sliders to start building a virtual server that fits your needs. Choose hourly or monthly billing. Then configure the details to exactly what you need. Add extra storage, choose an operating system, add control panels, firewalls, monitoring, and more.

Control the company you keep.
Public and Private Node Virtual Servers

SoftLayer virtual servers are available on public or private nodes of our public cloud. Deploy a public node virtual server for workloads suited to a multi-tenant environment. Or choose a private node and your virtual server will be deployed on a host server dedicated to you, giving you the ability to consume all of the node’s hardware resources if and when your needs grow.

Loading
One storage plan doesn't fit all.
Local and SAN storage, and Portable Storage Volumes

SoftLayer virtual servers can be deployed with primary storage based on local disk or Storage Area Network (SAN), and with portable storage volumes as secondary storage. Whether your application needs higher disk I/O, resiliency, or long-term flexibility, you can match your virtual server’s storage to its application.



SSD Local Storage Availability
Benefit from high-performance SSD local storage

To deliver peak storage performance, SoftLayer began installing solid state drives in virtual server host nodes in 2014. All virtual servers ordered with local disk storage in the data centers launched after that transition are provisioned with SSD resources at no additional charge. Those facilities include: AMS03, CHE01, DAL08, DAL09, FRA02, LON02, MEL01, MEX01, MIL01, MON01, PAR01, SAO01, SJC03, SYD01, TOK02, TOR01, WDC03, and WDC04. Virtual servers ordered in all other SoftLayer facilities may be provisioned on SSDs or spinning disks.

Included Features and Services

All virtual servers come with a comprehensive set of features and services— one of the industry’s best. With these features included at no additional cost, you can accelerate deployment and optimize your total cost of operations.


Network

250GB/month Outbound Public Bandwidth (with monthly billing)
Unlimited Inbound Public Bandwidth
Unlimited Private Network (Server-to-Server) Bandwidth
100Mbps Public and Private Network Ports (upgradable to 1Gbps)
Private VLAN via Public & Private Network
Geographically Redundant DNS
Dual-Stack IPv4 and IPv6 Capable

Security/Compliance
24x7 Onsite Security
Proximity and Biometric Access Control
Digital Security Video Surveillance
Access to SoftLayer SOC II Report

Support
24x7 Online and Phone Support
24x7 Data Center Staffing
Advanced Resolution System
Trouble Ticketing System

Developer Tools
SoftLayer API
SoftLayer Development Network
Digital Transcoding
Email Delivery Service
Message Queue and Notification Service

System Administration
Advanced System Reporting
Automated OS Reloads
Hardware Identification
Remote Reboot & Console Access
Nimsoft Monitoring

Management Tools
Flex Images
Image Import/Export Tool
Auto Scale
Rescue Kernel
PassMark BurnIn Test Certification

Related Information
Are virtual servers the same as VPS?
Compare and contrast virtual servers and virtual private servers.

Flex Images
Provision server images interchangeably on virtual and bare metal servers

Stock up on Storage
Learn about the storage solutions you can add to your cloud hosting environment.

Learn More: http://www.softlayer.com




PCB Assembly

We also have ability for PCB layout, PCBA  and Circuit assembly, specializes in producing the various electronic products based on your customized designs and do pcba, pcb assembly for all kinds of small, medium Volume electronic products.
Enabling you to focus on product development and sales, we can solve your production technology issues and take care of product quality.

Loading

The operation we can handle for you is from the Bare pc board fabrication, full component procurement, SMT/BGA/DIP assembly, mechanical/case assembly, rubber molding, functional testing, repair, inspection of finished goods to shipment arrangement.


    Material:

    SMD package, Chip-on-board and Flip Chip assembly technique
    0201 chip, Micro BGA, u-BGA, QFN and LGA assembly
    AI and Thru-hole assembly
    RoHS, REACH compliance and Lead-Free solder technology
    Chip Programming
    Conformal Coating
    ICT test and AOI inspection
    ESD Protection Control Procedure
    IPC-A-610E Class II and Class III Workmanship Standard


    Source: http://www.fr4-pcb.com/provide-99173-pcb-assembly